The Netstat command is used to display various network related information such as network connections, routing tables, interface statistics, masquerade connections, multicast memberships, and more. Netstat is a console command and a very useful tool for monitoring TCP/IP networks. It displays routing tables, actual network connections, and status information for each network interface device. Netstat is used to display statistics related to IP, TCP, UDP, and ICMP protocols. It is generally used to check the network connection of each port of the machine. Tools/Materials Computers wondows server2003 method/steps to display Ethernet statistics and statistics for all protocols. C:"netstat -e –s To display statistics for TCP and UDP protocols. C:"netstat –s –p tcp udp To display the TCP connection and its corresponding incoming ID, it is displayed every 4s. C:"netstat –o 4 4 to display the TCP connection and its corresponding ID in digital. C:"netstat –n –o END Note The netstat command can know the view port, the process occupies the netstat command format, NETSTAT [-a] [-b] [-e] [-f] [-n] [-o] [-p proto] [-r] [-s] [-x] [-t] [interval] How to use the netstat command When using a computer to access the Internet, sometimes you need to connect to the number of the machine and the port number, this time you need to use the netstat command, then how to use the netstat command? Please see the brief introduction below. Method / step The first step, click on the bottom left corner to start The second step, continue to click to run The third step, pop up a dialog box The fourth step, enter the command cmd The fifth step, pop up the DOS window In the sixth step, enter the command netstat as follows The seventh step, the return results are as follows Iget Legend,Iget Legend Pod Pen Kit,4000 Puffs Iget Legend Disposable Vape,Iget Legend E-Cigarette Australia Shenzhen Uscool Technology Co., Ltd , https://www.uscoolvape.com
